Filling Instructions and Frequently Asked Questions
Filling Instructions
- Remove HydraBarrier from packaging.
- Using the two plastic loops attached to fill cap, pull filler cap from HydraBarrier body until it pops out, providing easy access to the spout for filling.
- Remove cap and fill using standard garden hose.
Note: For large jobs, a hose adapter is recommended. Hose adapter is included with 4 and 8 packs. - Once sufficiently filled, screw the cap back on the HydraBarrier.
- To place HydraBarrier in desired location, simply pick up one end of HydraBarrier and drag to desired location.
Keep in mind: Though HydraBarrier's are constructed of robust vinyl material, they can still be punctured if overly abused. Use common sense when placing near or dragging over sharp objects.
That's it! Just fill and put in place -- it's really that easy!
Frequently Asked Questions
Q - How do I order HydraBarriers?
A - HydraBarriers can be ordered at : http://www.hydrabarrier.com
Q - How will my HydraBarriers ship and how long will it take them to get to me?
A - HydraBarriers ship via USPS Priority Mail and
typically take from 2 - 3 days to arrive
Q - How do I use the HydraBarrier?
A - To use the HydraBarrier, simply fill with water,
according to the guidlines defined above, then
simply pick up one end of the HydraBarrier and
drag to desired location. HydraBarriers, unlike
traditional sandbags, are very easy to move and
reposition as needed.
Q - How much water can a HydraBarrier divert ?
A - HydraBarriers are designed as a water diversion
device and as such can divert endless streams of
water. That being said HydraBarriers are intended
for moderate use and are sufficient for moderate
rainfall or other sources of steady water streams
that need to be diverted.
Q - Can multiple HydraBarriers be used together?
A - Yes HydraBarriers were designed to work together
to construct large barriers. Simply place HydraBarriers end to end to increase the length
of the barrier.
Q - What happens if the water in my HydraBarrier freezes?
A - When HydraBarrier's are used in extreme cold conditions, it is recommended that they be filled to no more than 2/3 capacity. This will allow for expansion if the water freezes. The cold temperatures will not have any adverse affect on the HydraBarrier's material or construction, they can be continued to be used over and over.
Tip : The water in the HydraBarrier can be treated with antifreeze to avoid freezing .
Q - How do I store the HydraBarriers when I'm done?
A - Simply remove the filler cap and drain the water
from the HydraBarrier and store in any convenient
location. The HydraBarrier will be there waiting for
the next it is needed.
Q - Are there any special care instructions?
A - Yes, though HydraBarriers are made out of
industrial strength vinyl, they are not immune to
punctures. Take care not to drag or place the
HydraBarrier over sharp or abrasive objects.
Q - Can I store drinking water in a HydraBarrier?
A - No, water that is used in a HydraBarrier is not
meant to be potable. However, the HydraBarrier is
an excellent vehicle for storing or transporting non
potable water.
Q - What are HydraBarriers made of?
A - HydraBarriers are made from industrial strength
22mil vinyl
Q - How much does a HydraBarrier weigh?
A - Empty HydraBarriers are very light weighing
approximately 1 pound. Once filled with water a
single HydraBarrier can weigh in excess of 75 lbs.
Q - How much water can a HydraBarrier hold?
A - A full HydraBarrier can hold 9 to 10 gallons of water
Q - What other applications are HydraBarriers used for?
A - In addition to water diversion and flood control,
HydraBarriers are commonly used as anchors to
secure possessions in windy conditions. They are
also an excellent solution for anchoring tarps or
other covers from blowing away in windy
conditions. HydraBarriers are also used for storing
and transporting non potable water.